刚柔耦合2K-V型传动装置的精度设计与实验研究

项目名称： 刚柔耦合2K-V型传动装置的精度设计与实验研究

项目编号： No.51505336

项目类型： 青年科学基金项目

立项/批准年度： 2016

项目学科： 机械、仪表工业

项目作者： 贾海利

作者单位： 天津职业技术师范大学

项目金额： 20万元

中文摘要： 高精度高性能2K-V型减速器是工业机器人、机电精密控制装置及军事装备等高端精密智能装备的关键部件，其精度设计有重要的研究价值。本课题基于刚柔耦合多体动力学理论全面考虑传动件柔性、轮齿时变啮合刚度、装配误差等因素建立2K-V减速器精细化非线性动力学模型。通过对不同机型、不同结构参数样机的实验修正动力学模型。采用数值法解算模型并建立该传动系统的误差源与传动精度之间的映射网络, 结合模拟实验定量分析传动精度的影响因子，为该传动装置的精度设计提供方法和依据。综合考虑动静态误差（如加工误差、支承处的微变形位移等）等因素对系统传动精度的影响，动态仿真并实验测试摆线针轮多齿啮合传动中其柔性对传动件制造误差、装配误差及间隙的补偿机理，从而合理制定关键零部件的公差控制策略，以保证精度的同时有效降低制造成本。在此基础上制定2K-V型减速器精度设计标准, 从而推进自主知识产权的高精度2K--V型减速器的产业化。

中文关键词： 2K-V；减速器；刚柔耦合；动力学分析；精度设计

英文摘要： High accuracy and high performance of 2K-V type reducer is the key component of industrial robots, electrical and mechanical accuracy control devices, military equipments and other high accuracy intelligent equipments. Its accuracy design has the important research value. The fine nonlinear dynamics model for 2K-V reducer is established in this subject based on multi-body dynamics theory of rigid-flexible coupling comprehensively considering transmission parts’ flexibility, time-varying meshing stiffness, assembly error and other factors. The dynamic model is modified and improved through the experimental tests for different models, different structural parameters of prototypes. The model is solved by the numerical method. Mapping network between error sources and transmission accuracy of this transmission system is established. Impact factors of transmission accuracy are quantitatively analyzed combining with simulation experiments to provide methods and basis for the accuracy design of high accuracy transmission device. Dynamic simulation and experiment are performed to find the compensation principle of cycloidal pin wheel’s flexibility on drive parts’ manufacturing error assembly error and clearance in the multi-tooth meshing transmission. The influence of the static and dynamic error (such as the processing error, the micro deformation and displacement on the support position, etc), bearing stiffness and other factors on the system drive accuracy has been taken into account. Finally the tolerance control strategy of key parts is reasonably drawn up so as to ensure the accuracy and reduce the manufacturing cost. On this basis, the accuracy design standards of high accuracy 2K-V transmission are formulated so as to promote the industrialization of high accuracy 2K-V reducer with Independent intellectual property rights.

英文关键词： 2K-V Reducer ;Rigid-flexible Coupled;Dynamics Analysis;Accuracy Design