Vision-based tactile sensors have gained extensive attention in the robotics community. The sensors are highly expected to be capable of extracting contact information i.e. haptic information during in-hand manipulation. This nature of tactile sensors makes them a perfect match for haptic feedback applications. In this paper, we propose a contact force estimation method using the vision-based tactile sensor DIGIT, and apply it to a position-force teleoperation architecture for force feedback. The force estimation is done by building a depth map for DIGIT gel surface deformation measurement and applying a regression algorithm on estimated depth data and ground truth force data to get the depth-force relationship. The experiment is performed by constructing a grasping force feedback system with a haptic device as a leader robot and a parallel robot gripper as a follower robot, where the DIGIT sensor is attached to the tip of the robot gripper to estimate the contact force. The preliminary results show the capability of using the low-cost vision-based sensor for force feedback applications.
翻译:以视觉为基础的触觉传感器在机器人界得到了广泛的关注。 高度预期传感器能够提取接触信息, 即手动操作过程中的偶然信息。 触摸传感器的这种性质使得它们完全匹配于偶然反馈应用。 在本文中, 我们提议使用基于视觉的触摸传感器DIGIT进行接触力量估计方法, 并将其应用到定位的远程操作结构中, 以便进行武力反馈。 武力估计的方法是绘制DIGIT表面变形测量深度图, 并对估计深度数据和地面真情数据进行回归算法, 以获得深度- 力量关系。 实验的方法是建立一个掌握力反馈系统, 使用机智装置作为领先机器人, 并用平行的机器人抓抓抓器作为跟踪机器人, 将DIGIT传感器附在机器人控制器的顶端, 以估计接触力。 初步结果显示, 使用低成本的视觉传感器进行力量反馈应用的能力 。