In this paper, the problem of minimizing the weighted sum of age of information (AoI) and total energy consumption of Internet of Things (IoT) devices is studied. In the considered model, each IoT device monitors a physical process that follows nonlinear dynamics. As the dynamics of the physical process vary over time, each device must find an optimal sampling frequency to sample the real-time dynamics of the physical system and send sampled information to a base station (BS). Due to limited wireless resources, the BS can only select a subset of devices to transmit their sampled information. Thus, edge devices must cooperatively sample their monitored dynamics based on the local observations and the BS must collect the sampled information from the devices immediately, hence avoiding the additional time and energy used for sampling and information transmission. To this end, it is necessary to jointly optimize the sampling policy of each device and the device selection scheme of the BS so as to accurately monitor the dynamics of the physical process using minimum energy. This problem is formulated as an optimization problem whose goal is to minimize the weighted sum of AoI cost and energy consumption. To solve this problem, we propose a novel distributed reinforcement learning (RL) approach for the sampling policy optimization. The proposed algorithm enables edge devices to cooperatively find the global optimal sampling policy using their own local observations. Given the sampling policy, the device selection scheme can be optimized thus minimizing the weighted sum of AoI and energy consumption of all devices. Simulations with real data of PM 2.5 pollution show that the proposed algorithm can reduce the sum of AoI by up to 17.8% and 33.9% and the total energy consumption by up to 13.2% and 35.1%, compared to a conventional deep Q network method and a uniform sampling policy.
翻译:在本文中,将信息年龄的加权总和(AoI)和互联网物质(IoT)设备总能量消耗量的加权总和最小化的问题正在研究之中。在所考虑的模型中,每个IoT设备都监测非线性动态的物理过程。随着物理过程的动态变化,每个设备必须找到最佳采样频率来抽样物理系统的实时动态,并将抽样信息发送基站(BS)。由于无线资源有限,BS只能选择一组深层次的仪器来传输其抽样信息。因此,边缘装置必须合作地根据当地观测对监测的动态进行抽样,9.9 并且BS必须立即从这些装置收集抽样信息,从而避免取样和信息传输所使用的额外时间和能量。为此,每个装置必须共同优化每个设备的采样政策和BS13的装置选择计划,以便精确监测物理过程的动态,使用最低能量。 这一问题的优化目标是将AOI成本和能源消耗的加权总和加权总和比例进行最优化。为了解决这一问题,我们提议采用一种创新的节能政策方法来进行最佳化分析。