压电复合结构振动俘能与主动控制同步实现的理论与试验研究

项目名称： 压电复合结构振动俘能与主动控制同步实现的理论与试验研究

项目编号： No.11502188

项目类型： 青年科学基金项目

立项/批准年度： 2016

项目学科： 数理科学和化学

项目作者： 薛晓敏

作者单位： 西安交通大学

项目金额： 22万元

中文摘要： 本项目对小型无人驾驶飞行器翼梁集成智能压电传感器、作动器和俘能器的振动主动控制技术展开研究，旨在解决能量供给困难且需要精确振动抑制的结构系统若干关键性技术难题。首先，提出考虑材料非线性弹性、迟滞和机电耦合特性的压电复合结构动力学模型，该模型可适用于压电各功能元件及其结构特性的描述；然后，设计功能压电元件综合优化配置准则，并结合高效优化算法实现控制系统功能元件数目和位置配置最佳方案；基于以上成果，根据压电俘能器供能与控制系统耗能的平衡关系，设计可适用于压电复合结构主动控制系统的低能耗鲁棒控制器；最后，建立黏贴压电传感器、作动器和俘能器悬臂梁振动控制系统试验平台，通过振动俘能性能试验和振动主动控制试验验证所提理论的正确性。项目的完成，将建立起一套压电复合结构振动俘能与主动控制同步实现的理论和技术，为开发自传感、自供能、自控制现代化智能控制系统提供重要基础。

中文关键词： 结构振动控制；压电作动器；压电俘能器；机电耦合；非线性

英文摘要： This project presents a theoretical analysis and experimental study on active vibration control of small unmanned aerial vehicles (UAVs) with sensors, actuators and harvesters made of piezoelectric materials. And it is set out to solve some key problems in simultaneous energy harvesting and vibration alleviating for multifunctional smart structures. The content of the project is introduced as follows. Firstly, inherent nonlinearities of piezoelectric materials are pronounced in their sensing, actuation and harvesting applications. In view of this, a unified nonlinear dynamic modeling method is proposed according to some obvious nonlinear characteristics including elastic nonlinear terms, hysteresis and coupling nonlinearities. It can provide necessary theoretical basis for the controller design of the multifunctional systems. Secondly, the number and location of the sensors, actuators and harvesters in multifunctional systems are studied. Its configuration rule is made up based on energy minimization, information acquisition and vibration reduction maximization. In order to realize the configuration rule, one modified Genetic Algorithm (GA), which are more efficient than traditional ones, is adopted to find out the optimal number and location of the sensors, actuators and harvesters. Based on the preceding results, an intelligent controller is designed subsequently by employing fuzzy control and optimization algorithm. The simulation results will be used to demonstrate that the vibration reduction and the energy consumption are both very satisfactory. Finally, electro-mechanical experiments are carried out about energy harvesting and vibration suppression for a multifunctional composite beam via piezoelectric elements. The tests are used to testify the validity and feasibility of the presented control theory in the project. This project can provide a brand-new technology about simultaneous energy harvesting and vibration alleviating for multifunctional structures or systems in aerospace applications.

英文关键词： Structural vibration control;Piezoelectric actuator;Piezoelectric harvester;Electro-mechanical coupling;Nonlinear